General Construction Services in Southwest Florida
SW Florida Builders Group is a licensed general contractor providing general construction services in Southwest Florida, from permit application to final inspection, with clear scopes and plain-language guidance.
- Florida Certified General Contractor CGC1532489
- Permits and inspections handled for you
- Serving Southwest Florida and the Tampa Bay region

What our general construction work covers
New construction
Ground-up residential and light commercial buildings built to the Florida Building Code. We coordinate engineering, site work, framing and finishes under one contract.
Additions and expansions
Room additions, second-story work and garage expansions tied into the existing structure. We verify the existing load path before we draw anything new.
Remodels and renovations
Whole-home and targeted remodels, including kitchens, baths and layout changes. Existing-condition surprises are priced openly, not buried in the contract.
Commercial build-outs
Tenant improvements and small commercial interiors for offices, retail and service space. We plan around landlord requirements, fire and egress rules and inspection timing.
Structural repair
Rotted framing, damaged headers and storm damage get an engineered repair path. Repairs are permitted and inspected, not patched out of sight.
Permit and inspection management
We prepare the permit package, schedule inspections and respond to plan review comments. You always know what the building department is waiting on.
General construction services in Southwest Florida start with a clear scope
A general contractor is the single party responsible for how a building project is planned, priced, permitted and built. On a typical job that means hiring and scheduling the trades, ordering materials, keeping the site safe and answering to the building department.
We begin by walking the property and writing down what exists: foundation type, wall construction, roof framing, electrical service, flood zone and any earlier work. Older Florida homes often mix original concrete block with later wood-framed additions. Knowing this before pricing keeps the estimate honest.
Our work covers new builds, additions, remodels and commercial interiors across Southwest Florida and the Tampa Bay region. We coordinate the trades involved, and you can review them on our construction services page.
- Written scope of work with allowances called out
- Site walk and existing-condition notes before pricing
- Engineering and design coordination when the project requires it
- One point of contact from permit to final inspection
- Change orders in writing before extra work begins
Florida Building Code, wind and flood: what shapes your build
Florida is one of the most heavily regulated building environments in the country because of hurricanes. The Florida Building Code sets requirements for structural load paths, roof-to-wall connections and openings in wind-borne debris regions, where windows and doors typically need impact-rated glazing or approved shutters. The exact wind speed and exposure category depend on your address, so the design starts there.
Flood zones add another layer. In FEMA-mapped flood hazard areas, the first floor elevation, foundation type and materials below the flood line can all be regulated. We check your flood zone early because it can change foundation design and cost.
Egress, fire separation, energy code and electrical load calculations round out the review. These cost little when planned up front and a lot when discovered at inspection, so we build the code checklist into the estimate.
- Wind speed, exposure and impact-rated opening requirements
- Flood zone and base flood elevation check
- Engineered load path for new walls, beams and tie-downs
- Egress, smoke alarm and fire separation requirements
- Energy code and electrical load requirements

Permits, inspections and what we can and cannot promise
Almost all structural, electrical, plumbing and roofing work in Florida requires a permit, and the rules are set by your city or county, not by us. Engineered drawings, a survey or zoning review depend on scope and jurisdiction, so permit requirements are case-dependent.
We cannot guarantee that a permit will be approved or how long review will take. Reviewers can request corrections. What we can do is submit a complete package, respond quickly and schedule inspections as each phase is ready, from footing and framing through final.
Substantial improvement rules deserve a specific mention. In a FEMA-mapped flood hazard area, the 50 percent rule generally applies when the cost of improvements or repairs equals or exceeds 50 percent of the market value of the structure, not including the land. When it applies, the whole building must meet current floodplain requirements. Local rules can be stricter, and the local floodplain administrator makes the final determination.
- Permit requirements confirmed with your local jurisdiction
- Complete submittal package and quick responses to review comments
- Inspections scheduled phase by phase through final
- Flood substantial-improvement question raised before design is locked
- No promise of approval or a fixed review timeline
General construction project paths compared
| Project path | What usually drives the permit | What to settle early |
|---|---|---|
| New build | Full plan review, structural engineering, site and flood requirements | Survey, flood zone and utility locations |
| Addition | Structural tie-in, setbacks, energy and egress requirements | Condition of existing framing and roofline |
| Whole-home remodel | Scope of structural, electrical and plumbing changes | Whether the 50 percent rule could apply |
| Commercial build-out | Occupancy, fire, accessibility and landlord approvals | Lease requirements and inspection timing |
| Structural repair | Engineer’s repair detail and inspection of hidden work | Cause of damage and any moisture source |
How a project moves from estimate to final inspection
-
Site visit and estimate request
Tell us about the project and we walk the site, review any drawings and note existing conditions.
-
Written scope and price
You receive a scope that lists what is included, what is an allowance and what is excluded.
-
Design and permit package
We coordinate engineering and drawings, submit to your building department and handle review comments.
-
Construction with inspections
Trades are scheduled in sequence, and inspections are called as each phase is complete.
-
Final inspection and closeout
We walk the finished work with you, close out the permit and hand over the documentation.
General construction questions homeowners ask
Do I need a licensed general contractor in Florida?
Florida requires licensed contractors for most construction work that needs a permit, and a general contractor can pull permits and supervise every trade on the job. Our license is Florida Certified General Contractor CGC1532489.
How long does permitting take?
It varies by city or county, project type and plan review workload, so we cannot promise a fixed number of weeks.
What is the 50 percent rule?
The 50 percent rule is a floodplain provision. In a mapped flood hazard area, if improvements or repairs cost 50 percent or more of the structure’s market value, excluding land, the whole building must meet current flood requirements. Local rules may be stricter, and your floodplain administrator decides how it applies to your property.
Do windows and doors need impact ratings?
In wind-borne debris regions, openings generally need impact-rated products or approved protection such as shutters. Whether your address falls in one depends on location and local code, and we confirm it during design.
Do you work outside Southwest Florida?
We serve Southwest Florida and the Tampa Bay region from our Clearwater office. Send us your address and we will confirm.
Related services
- Residential construction
- ADU and garage conversions
- Load-bearing walls and beams
- Red tag and permit resolution
More from swflbg.com
Talk through your project with a licensed contractor
Send us the address and a short description for a site visit and written estimate.
SW Florida Builders Group1515 Lakeview Dr., Clearwater, FL 33763
Florida Certified General Contractor CGC1532489