SW Florida Builders Group

Licensed & Insured
License Number:
CGC#1532489
A construction professional in safety equipment reviewing a clipboard

Red Tag & Permit Infirmity Resolution

Get a free estimate

Permit problems, handled openly

Dealing with a red tag, expired permit or unpermitted work? SW Florida Builders Group provides red tag permit resolution in Southwest Florida, working with your building department to bring the work into compliance.

  • Florida Certified General Contractor CGC1532489
  • Open permits, expirations and unpermitted work reviewed
  • Serving Southwest Florida and the Tampa Bay region

What our permit infirmity work covers

Red-tagged jobs

A red tag or stop-work notice means the building department found a problem. We read the notice, inspect the work and plan the corrections.

Expired permits

Permits can lapse when work stalls or inspections are missed. We find out what your jurisdiction needs to renew, reactivate or reapply.

Open permits

Old permits left without a final inspection can surface during a sale or refinance. We help work them toward closure.

Unpermitted work

Work done without a permit may need an after-the-fact permit, opening up for inspection or correction. Your jurisdiction decides what it will accept.

Contractor of record changes

If the original contractor left, a new contractor can apply to take over the permit. The local building department must approve the change, and it is not automatic.

Engineering and corrections

When inspectors cite structural or code deficiencies, we coordinate an engineer’s evaluation and the corrective work. Hidden work is opened for inspection where required.

Red tag permit resolution in Southwest Florida begins with the notice

Architectural plans and drawing tools on a planning desk

A red tag is a notice, often a stop-work order, posted when an inspector finds work that does not match the permit or the code. Permit infirmity is a broader term for deficiencies in the permit itself, such as expiration, an open permit that was never finaled or work that was never permitted. Terms and procedures differ between cities and counties.

The first step is to read the notice and pull the permit record. We want to know what was approved, what was built, which inspections passed and what the department says is wrong. Many problems are fixable, but the path depends on your jurisdiction and we cannot promise a result.

Timing matters because some permits lapse after a set period without a passed inspection, and the rules for reviving them are local. Acting early can keep the options simpler.

  • Copy of the notice and permit record reviewed
  • Site visit to compare built work with approved plans
  • Inspection history and expiration dates confirmed
  • List of deficiencies the department cited
  • Honest read on likely next steps

Legalizing work: after-the-fact permits and contractor of record

When work was built without a permit, jurisdictions commonly ask for an after-the-fact permit. That can include drawings, engineering and fees, and may require opening walls so inspectors can see framing, wiring or plumbing. Some work may need to be corrected. The jurisdiction decides what it accepts.

If the contractor who pulled the permit is gone, a new licensed contractor can ask to become contractor of record. That is a request to the building department, which has its own forms and conditions. We can take that role only if your jurisdiction approves, and we will tell you what we find before you commit.

  • After-the-fact permit package with required drawings
  • Engineer’s letter or sealed drawings when requested
  • Contractor-of-record request submitted to your jurisdiction
  • Work opened for inspection only where required
  • Corrections built to the cited code items

Closing the permit and what we cannot promise

A permit is finished when it passes final inspection and the department closes it. Until then, an open permit can follow the property and may complicate a sale or refinance.

We cannot promise a particular outcome, a fee amount or how long a department will take. Reviewers may ask for more information, and some work may not be approvable as built. We can prepare complete submittals, respond to comments, perform corrections and call inspections until final. If repair costs are significant in a mapped flood hazard area, the 50 percent rule may also apply, and your floodplain administrator decides.

  • Complete response to each cited deficiency
  • Corrective work built to the approved scope
  • Re-inspections called as each item is ready
  • Final inspection and permit closeout
  • No promise of outcome, fees or timeline

Permit problems compared

SituationWhat the jurisdiction usually asks forWhat to settle early
Red tag or stop-work noticeCorrection of cited items and re-inspectionCopy of the notice and the approved plans
Expired permitRenewal, reactivation or a new permitLast passed inspection and expiration date
Open permitRemaining inspections through finalWhich inspections are missing
Unpermitted workAfter-the-fact permit, drawings and inspectionWhether hidden work must be opened
Original contractor goneContractor-of-record change requestOwner and prior contractor documents

How a permit problem moves from notice to closeout

  1. Review the notice and record

    Send us the notice, permit number and address. We pull the record and read what the department found.

  2. Site visit and findings

    We compare built work with approved plans and list the deficiencies.

  3. Plan with your jurisdiction

    We confirm what it will require, including permits, drawings, engineering or a contractor-of-record request.

  4. Corrections and inspections

    We complete the corrective work and call inspections as each item is ready.

  5. Final inspection and closeout

    We follow the permit to final inspection and closure.

Red tag and permit questions homeowners ask

What is a red tag?

A red tag is a stop-work or violation notice posted when an inspector finds work that does not match the permit or code. What it requires and how to clear it differ by jurisdiction.

Can you take over a permit from another contractor?

We can apply to become contractor of record, but the change needs your local building department’s approval and is not automatic.

Can unpermitted work be legalized?

Often a jurisdiction offers an after-the-fact permit process, but approval is not guaranteed and some work may need correction.

What happens if my permit expired?

Your jurisdiction decides whether it can be renewed, reactivated or must be reapplied for. We confirm the process and the inspections that remain.

Do you serve my area?

We serve Southwest Florida and the Tampa Bay region from our Clearwater office. Send us your address and we will confirm.

Call us and get started!

Bring us the notice and we will read it with you

Send us the address, permit number and a copy of the notice for a site visit and written plan.

SW Florida Builders Group
1515 Lakeview Dr., Clearwater, FL 33763

Florida Certified General Contractor CGC1532489

error: Content is protected !!